ANNOUNCEMENT OF STANDARDS
Standards Related Machine Tools Equipment
The standard related to machine tools and equipment comprise the JMAA's standards (TES), the Japanese industrial standards (JIS) and the international standards (ISO). The TES standard (Tooling and Equipment Standard) are the industries' standards established by the producers' committee members of the JMAA.
The related JIS standards have been established through the prescribed procedures since the drafts were submitted to the METI's Industrial Science and Technology Policy and Environment Bureau, with JMAA becoming the drafting body including users and neutral members as the drafting committee members for multiple deliberations.
As for ISO, JMAA, becoming the domestic deliberative body of the several subcommittees (SC) etc., is engaged in preparing and revising the drafts of the international standards (ISO). JMAA is currently promoting rationalization of the international standards in cooperation with the Japanese Standards Association.
Acquisition of Standards
JMAA standards (TES)
For the JMAA standards (TES), please contact JMAA by fax or by e-mail.
TEL 03-3431-4103 FAX 03-3434-2613
e-mail: info@jmaa.or.jp
Japanese industrial standards (JIS)
Please contact the Japanese Standards Association/ Publishing Group./Sales Promotion Team
Mita MT Bldg. 3-13-12 Mita, MINATO-KU,TOKYO 108-0073,JAPAN
TEL 03-4231-8550 FAX 03-4231-8665
http://www.jsa.or.jp
International standeards (ISO)
Please contact the Japanese Standards Association/ Publishing Group./Sales Promotion Team
Mita MT Bldg. 3-13-12 Mita, MINATO-KU,TOKYO 108-0073,JAPAN
TEL 03-4231-8550 FAX 03-4231-8665
Listst of Standards
TOOLING AND EQUIPMENT STANDARD (TES)
| Document No. | Title |
|---|---|
| TES 1111: 2005 | Electromagnetic Clutches and Electromagnetic brakes |
| TES 1301: 2000 | Measuring methods of Liner guideways |
| TES 1401: 2012 | Nomenclature and test procedure for disc coupling |
| TES 2101: 2012 | NC rotary table and NC tilting table - Testing of accuracy |
| TES 2201: 2005 | Machine vises |
| TES 3101: 1990 | Machine tools - Dimensions for power operated chucks |
| TES 3102: 1990 | Machine tools - Dimensions for jaw mountings on power operated chucks with serrated jaws |
| TES 3103: 1995 | Machine tools - Dimensions for rotary clamping cylinders with closed-center |
| TES 4004: 2011 | Technical terms for tooling |
| Technical Data | Machining centers - Interface with flange contacr surface - Part 1: Tool shanks |
| Technical Data | Machining centers - Interface with flange contacr surface - Part 2: Dimensions of spindle noses |
JAPANESE INDUSTRIAL STANDARD (JIS)
| Document No. | Title | Corresponding International Standards |
|---|---|---|
| JIS B 1192: 1997 | Ball screws | ISO 3408-1, 3408-2, 3408-3 |
| JIS B 1193: 2004 | Ball Splines | |
| JIS B 1404-1: 2005 | Electromagnetic clutches and electromagnetic brakes - Part 1: Vocabulary | |
| JIS B 1404-2: 2005 | Electromagnetic clutches and electromagnetic brakes - Part 2: Test methods | |
| JIS B 4216: 1998 | Cutter abors - Dimensions | ISO 3937 |
| JIS B 4634: 1998 | Drill chuck | ISO 239, 10887 |
| JIS B 5201: 1998 | Jig bushes and accessories | ISO 4247, 4248 |
| JIS B 6006: 1993 | Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws | ISO 3442 |
| JIS B 6006-1：2008 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws | ISO 3442-1 |
| JIS B 6006-2：2008 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws | ISO 3442-2 |
| JIS B 6006-3：2008 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws | ISO 3442-3 |
| JIS B 6064-1：2007 | Hollow taper interface with flange contact sueface - Part 1: Shanks - Dimensions | ISO 12164-1 |
| JIS B 6064-2：2007 | Hollow taper interface with flange contact sueface - Part 2: Receivers - Dimensions | ISO 12164-2 |
| JIS B 6104: 1998 | Milling machine arbors and accessories - Dimensions | ISO 839-1, 839-2 |
| JIS B 6151: 1993 | Scroll chucks | |
| JIS B 6152: 1993 | Self-centering manually-operated chucks for machine tools - Accreptance test specifications (geometrical tests) | ISO 3089 |
| JIS B 6159: 1998 | Universal driving head - Testing of accuracy | ISO 5734 |
| JIS B 6161: 1998 | Machine tools - Lathe centers - Sizes for interchengeability | ISO 298 |
| JIS B 6163: 1998 | Reduction sleeves and extension sockts for tools with Morse taper shanks Dimensions | ISO 238 |
| JIS B6339-1：2011 | Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF | ISO 7388-1 |
| JIS B6339-2：2011 | Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J, JD and JF | ISO 7388-2 |
| JIS B6339-3：2011 | Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Dimensions and designation of retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | ISO 7388-3 |
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
| Document No. | Title |
|---|---|
| ISO 238 | Reduction sleeves and extension sockets for tools with Morestaper shanks |
| ISO 239 | Drill chuck tapers |
| ISO 297 | 7/24 tapers for tool shanks for manual changing |
| ISO 298 | Machine tools - Lathe centres - Sizes for interchangeability |
| ISO 702-1 | Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection |
| ISO 702-2 | Machine tools - Spindle noses and face plates - Sizes for interchangeability - Part 2: Camlock type |
| ISO 702-3 | Machine tools - Spindle noses and face plates - Sizes for interchangeability - Part 3: Bayonet type |
| ISO 702-4 | Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection |
| ISO 839-1 | Milling machine arbors with 7/24 tapers - Part1: Dimensions |
| ISO 839-2 | Milling machine arbors with 7/24 tapers - Part2: Accessories |
| ISO 1080 | Machine tools -- Morse taper shanks -- Cotter slots with taper keys |
| ISO 3089 | Machine tools - Test conditions for self-centring, manually operated chucks with one-piece jaws |
| ISO 3408-1 | Ball screws - Part 1: Vocabulary and designation |
| ISO 3408-2 | Ball screws - Part 2: Nominal diameters and nominal leads-Metric series |
| ISO 3408-3 | Ball screws - Part 3: Acceptance conditions and acceptance tests |
| ISO 3408-4 | Ball screws -- Part 4: Static axial rigidity |
| ISO 3408-5 | Ball screws -- Part 5: Static and dynamic axial load ratings and operational life |
| ISO 3442-1 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws |
| ISO 3442-2 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws |
| ISO 3442-3 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws |
| ISO 3936 | Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions |
| ISO 3937-1 | Cutter arbors with tenon drive -- Part 1: Dimensions of Morse taper |
| ISO 3937-2 | Cutter arbors with tenon drive -- Part 2: Dimensions of 7/24 taper |
| ISO 3937-3 | Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface |
| ISO 4202 | Reduction sleeves with external 7/24 taper for tools with Morse taper shanks |
| ISO 4248 | Jig bushes - Definitions and nomenclature |
| ISO 5413 | Machine tools - Positive drive Morse tapers |
| ISO 5414-1 | Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 1: Dimensions of the driving system of tool shanks |
| ISO 5414-2 | Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 2: Connecting dimensions of chucks and designation |
| ISO 5415 | Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw |
| ISO 5734 | Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy |
| ISO 7388-1 | Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| ISO 7388-2 | Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J, JD and JF |
| ISO 7388-3 | Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
| ISO 9270-1 | 7/24 taper spindle noses for automatic tool changers -- Part 1: Dimensions and designation of spindle noses of forms S and SF |
| ISO 9270-2 7/24 taper spindle noses for automatic tool changers -- Part 2: Dimensions and designation of spindle noses of forms J and JF | |
| ISO 10887 | Key type three-jaw drill chucks - Specification |
| ISO 10888 | Keyless type three-jaw drill chucks - Specification |
| ISO 10889-1 | Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore - Technical deliverry conditions |
| ISO 10889-2 | Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs |
| ISO 10889-3 | Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat |
| ISO 10889-4 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat |
| ISO 10889-5 | Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat |
| ISO 10889-6 | Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat |
| ISO 10889-7 | Tool holders with cylindrical shank - Part 7: Type F with taper seat |
| ISO 10889-8 | Tool holders with cylindrical shank - Part 8: Type Z, accessories |
| ISO 12164-1 | Hollow taper interface with flange contact sueface - Part 1: Shanks - Dimensions |
| ISO 12164-2 | Hollow taper interface with flange contact sueface-Part 2: Receivers - Dimensions |
| ISO 12164-3 | Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools |
| ISO 12164-4 | Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools |
| ISO 16156 | Machine tools safety - Safety requirements for the design and construction of work holding chucks |
| ISO 19719 | Machine tools -- Work holding chucks -- Vocabulary |
| ISO 23848-1 | Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
| ISO 23848-2 | Machine tools -- Ball splines -- Part 2: Dynamic and static load ratings and rating life |
| ISO 26622-1 | Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks |
| ISO 26622-2 | Modular taper interface with ball track system -- Part 2: Dimensions and designation of receivers |
| ISO 26623-1 | Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks |
| ISO 26623-2 | Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers |